| Error Code |
Description |
Mode |
技术支持/手机 13301272832 (微信同号) |
| 100 |
Boot is running |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 120 |
Disk drive hardware error |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 130 |
Checking the internal disk file system |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 132 |
Updating BIOS settings of the node |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 135 |
Verifying the software |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 137 |
Updating system board service processor firmware |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 150 |
Loading cluster code |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 155 |
Loading cluster data |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 160 |
Updating the service controller |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 168 |
The command cannot be initiated because authentication credentials for the current SSH session have |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 170 |
A flash module hardware error has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 182 |
Checking uninterruptible power supply |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 232 |
Checking uninterruptible power supply connections |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 300 |
The 2145 is running node rescue. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 310 |
The 2145 is running a format operation. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 320 |
A 2145 format operation has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 330 |
The 2145 is partitioning its disk drive. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 340 |
The 2145 is searching for donor node.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 345 |
The 2145 is searching for a donor node from which to copy the software. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 350 |
The 2145 cannot find a donor node.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 360 |
The 2145 is loading software from the donor. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 365 |
Cannot load SW from donor. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 370 |
Installing software. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 500 |
Incorrect enclosure. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 501 |
Incorrect slot. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 502 |
No enclosure identity exists and a status from the partner node could not be obtained.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 503 |
Incorrect enclosure type. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 504 |
No enclosure identity and partner node matches.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 505 |
No enclosure identity and partner has system data that does not match.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 506 |
No enclosure identity and no node state on partner. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 507 |
No enclosure identity and no node state. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 508 |
Cluster identifier is different between enclosure and node. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 509 |
The enclosure identity cannot be read.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 510 |
The detected memory size does not match the expected memory size.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 511 |
Memory bank 1 of the 2145 is failing. For the 2145-DH8 only, the DIMMS are incorrectly installed. . |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 512 |
Enclosure VPD is inconsistent. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 517 |
The WWNNs of the service controller and the disk do not match.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 521 |
Unable to detect a Fibre Channel adapter. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 522 |
The system board service processor has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 523 |
The internal disk file system is damaged.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 524 |
Unable to update BIOS settings.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 525 |
Unable to update system board service processor firmware.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 528 |
Ambient temperature is too high during system startup. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 530 |
A problem with one of the node's power supplies has been detected.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 534 |
System board fault. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 535 |
Canister internal PCIe switch failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 536 |
The temperature of a device on the system board is greater than or equal to the critical threshold.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 538 |
The temperature of a PCI riser card is greater than or equal to the critical threshold.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 541 |
Multiple, undetermined, hardware errors. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 542 |
An installed CPU has failed or been removed.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 543 |
None of the node serial numbers that are stored in the three locations match.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 544 |
Boot drives are from other nodes.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 545 |
The node serial number on the boot drives match each other, but they do not match the product serial number on the system board.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 550 |
A clustered system cannot be formed because of a lack of clustered system resources.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 551 |
A cluster cannot be formed because of a lack of cluster resources.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 555 |
Power Domain error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 556 |
A duplicate WWNN has been detected.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 558 |
The node is unable to communicate with other nodes.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 560 |
Battery cabling fault. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 561 |
The nodes hardware configuration does not meet the minimum requirements. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 564 |
Too many machine code crashes have occurred.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 565 |
The internal drive of the node is failing.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 569 |
At boot time: the CPU reached a temperature that is greater than or equal to the warning threshold. During normal running: the CPU reached a temperature that is greater than or equal to the critical threshold.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 570 |
Battery protection unavailable. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 571 |
Battery protection temporarily unavailable; one battery is expected to be available soon. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 572 |
Battery protection temporarily unavailable; both batteries are expected to be available soon. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 573 |
The node machine code is inconsistent.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 574 |
The node machine code is damaged.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 576 |
The cluster state and configuration data cannot be read.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 578 |
The state data was not saved following a power loss.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 579 |
Battery subsystem has insufficient charge to save system data. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 580 |
The service controller ID could not be read.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 581 |
A serial link error in the 2145 UPS-1U has occurred.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 582 |
A battery error in the 2145 UPS-1U has occurred.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 583 |
An electronics error in the 2145 UPS-1U has occurred.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 584 |
The 2145 UPS-1U is overloaded.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 586 |
The power supply to the 2145 UPS-1U does not meet requirements.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 587 |
An incorrect type of uninterruptible power supply has been detected.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 588 |
The 2145 UPS-1U is not cabled correctly.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 589 |
The 2145 UPS-1U ambient temperature limit has been exceeded.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 590 |
Repetitive node transitions into standby mode from normal mode because of power subsystem-related node errors. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 650 |
The canister battery is not supported. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 651 |
The canister battery is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 652 |
The canister battery has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 653 |
The canister battery’s temperature is too low. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 654 |
The canister battery’s temperature is too high. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 655 |
Canister battery communications fault.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 656 |
The canister battery has insufficient charge. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 657 |
Not enough battery charge to support graceful shutdown of the storage enclosure.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 658 |
The remote setting is not available for users for the current system.. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 670 |
The UPS battery charge is not enough to allow the node to start. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 671 |
The available battery charge is not enough to allow the node canister to start. Two batteries are charging. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 672 |
The available battery charge is not enough to allow the node canister to start. One battery is charging. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 673 |
The available battery charge is not enough to allow the node canister to start. No batteries are charging. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 674 |
The cycling mode of a Metro Mirror object cannot be changed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 690 |
The node is held in the service state. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 700 |
The Fibre Channel adapter that was previously present has not been detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 701 |
A Fibre Channel adapter has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 702 |
A Fibre Channel adapter has a PCI error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 703 |
A Fibre Channel adapter is degraded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 704 |
Fewer Fibre Channel ports operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 705 |
Fewer Fibre Channel I/O ports operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 706 |
Fibre Channel clustered system path failure. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 710 |
The SAS adapter that was previously present has not been detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 711 |
A SAS adapter has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 712 |
A SAS adapter has a PCI error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 713 |
A SAS adapter is degraded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 715 |
Fewer SAS host ports operational |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 720 |
Ethernet adapter that was previously present has not been detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 721 |
An Ethernet adapter has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 722 |
An Ethernet adapter has a PCI error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 723 |
An Ethernet adapter is degraded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 724 |
Fewer Ethernet ports active. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 730 |
The bus adapter has not been detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 731 |
The bus adapter has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 732 |
The bus adapter has a PCI error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 733 |
The bus adapter degraded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 734 |
Fewer bus ports. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 736 |
The temperature of a device on the system board is greater than or equal to the warning threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 737 |
The temperature of a power supply is greater than or equal to the warning or critical threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 738 |
The temperature of a PCI riser card is greater than or equal to the warning threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 740 |
The command failed because of a wiring error described in the event log. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 741 |
CPU missing |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 743 |
A boot drive is offline, missing, out of sync, or the persistent data is not usable. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 744 |
A boot drive is in the wrong location. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 745 |
A boot drive is in an unsupported slot. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 746 |
Technician port connection invalid. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 747 |
The Technician port is being used. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 748 |
The technician port is enabled. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 766 |
CMOS battery failure. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 768 |
Ambient temperature warning. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 769 |
CPU temperature warning. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 770 |
Shutdown temperature reached |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 775 |
Power supply problem. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 776 |
Power supply mains cable unplugged. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 777 |
Power supply missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 779 |
Battery is missing |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 780 |
Battery has failed |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 781 |
Battery is below the minimum operating temperature |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 782 |
Battery is above the maximum operating temperature |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 783 |
Battery communications error |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 784 |
Battery is nearing end of life |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 785 |
Battery capacity is reduced because of cell imbalance |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 786 |
Battery VPD checksum error |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 787 |
Battery is at a hardware revision level not supported by the current code level |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 803 |
Fibre Channel adapter not working |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 818 |
Unable to recover the service controller flash disk. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 820 |
Canister type is incompatible with enclosure model |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 830 |
Encryption key required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 831 |
Encryption key is not valid. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 832 |
Encryption key file not found. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 833 |
Unsupported USB device. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 840 |
Unsupported hardware change detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 841 |
Supported hardware change detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 850 |
The canister battery is reaching the end of its useful life. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 860 |
Fibre Channel network fabric is too big. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 870 |
Too many cluster creations made on node |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 871 |
Failed to increment cluster ID |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 875 |
Request to cluster rejected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 878 |
Attempting recovery after loss of state data. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 888 |
Too many Fibre Channel logins between nodes. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 889 |
Failed to create remote IP connection. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 920 |
Unable to perform cluster recovery because of a lack of cluster resources. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 921 |
Unable to perform cluster recovery because of a lack of cluster resources. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 950 |
Special update mode. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 990 |
Cluster recovery has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1001 |
Automatic cluster recovery has run. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1002 |
Event log full. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1007 |
Canister to canister communication error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1009 |
DIMMs are incorrectly installed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1011 |
Fibre Channel adapter (4 port) in slot 1 is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1013 |
Fibre Channel adapter (4-port) in slot 1 PCI fault. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1014 |
Fibre Channel adapter in slot 1 is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1015 |
Fibre Channel adapter in slot 2 is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1016 |
Fibre Channel adapter (4 port) in slot 2 is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1017 |
Fibre Channel adapter in slot 1 PCI bus error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1018 |
Fibre Channel adapter in slot 2 PCI fault. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1019 |
Fibre Channel adapter (four-port) in slot 2 PCI fault. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1020 |
The system board service processor has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1021 |
Incorrect enclosure |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1022 |
The detected memory size does not match the expected memory size. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1024 |
CPU is broken or missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1025 |
The 2145 system assembly is failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1026 |
System board device problem. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1027 |
Unable to update BIOS settings. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1028 |
System board service processor failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1029 |
Enclosure VPD is unavailable or invalid. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1030 |
The internal disk of a node has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1031 |
Node canister location unknown. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1032 |
Fibre Channel adapter not working |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1034 |
Canister fault type 2 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1035 |
Boot drive problems |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1036 |
The enclosure identity cannot be read. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1039 |
Canister failure, canister replacement required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1040 |
A flash module error has occurred after a successful start of a 2145. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1044 |
A service controller read failure occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1048 |
Unexpected enclosure fault. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1052 |
Inter-canister PCIe link degraded |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1054 |
Fibre Channel adapter in slot 1 adapter present but failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1055 |
Fibre Channel adapter (4 port) in slot 1 adapter present but failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1056 |
The Fibre Channel adapter in slot 2 is present but is failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1057 |
Fibre Channel adapter (four-port) in slot 2 adapter is present but failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1060 |
One or more Fibre Channel ports on the 2072 are not operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1061 |
Fibre Channel ports are not operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1065 |
One or more Fibre Channel ports are running at lower than the previously saved speed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1067 |
Fan fault type 1 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1068 |
Fan fault type 2 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1083 |
Unrecognized node error |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1084 |
System board device exceeded temperature threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1085 |
PCI Riser card exceeded temperature threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1087 |
Shutdown temperature threshold exceeded |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1089 |
One or more fans are failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1090 |
One or more fans (40x40x28) are failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1091 |
One or more fans (40x40x56) are failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1092 |
The temperature soft or hard shutdown threshold of the 2072 has been exceeded. The 2072 has automatically powered off. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1093 |
The internal temperature sensor of the 2145 has reported that the temperature warning threshold has been exceeded. For the 2145-DH8 and 2145-CF8 only, the CPU temperature is too high. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1094 |
The ambient temperature threshold has been exceeded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1095 |
Enclosure temperature has passed critical threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1096 |
A Power Supply Unit is missing or has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1097 |
A power supply unit reports no A/C power. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1098 |
Enclosure temperature has passed warning threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1099 |
Temperature exceeded warning threshold |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1100 |
One of the voltages that is monitored on the system board is over the set threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1101 |
One of the voltages that is monitored on the system board is over the set threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1105 |
One of the voltages that is monitored on the system board is under the set threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1106 |
One of the voltages that is monitored on the system board is under the set threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1107 |
The battery subsystem has insufficient capacity to save system data due to multiple faults. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1108 |
Battery backplane cabling faulty or possible battery backplane requires replacing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1109 |
Battery or possibly battery backplane requires replacing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1110 |
The power management board detected a voltage that is outside of the set thresholds. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1111 |
Batteries have insufficient charge. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1112 |
Enclosure battery is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1114 |
Enclosure battery fault type 1 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1115 |
Enclosure Battery fault type 4 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1120 |
A high speed SAS adapter is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1121 |
A high speed SAS adapter has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1122 |
A high speed SAS adapter error has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1124 |
Power Supply Unit fault type 1 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1125 |
Power Supply Unit fault type 1 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1126 |
Power Supply Unit fault type 2 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1128 |
Power Supply Unit missing |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1129 |
The node battery is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1130 |
The node battery requires replacing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1131 |
Battery conditioning is required but not possible. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1133 |
A duplicate WWNN has been detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1135 |
The 2145 UPS has reported an ambient over temperature. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1136 |
The 2145 UPS-1U has reported an ambient over temperature. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1138 |
Power supply unit input power failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1140 |
The 2145 UPS has reported that it has a problem with the input AC power. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1141 |
The 2145 UPS-1U has reported that it has a problem with the input AC power. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1145 |
The signal connection between a 2145 and its 2145 UPS is failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1146 |
The signal connection between a 2145 and its 2145 UPS-1U is failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1150 |
Data that the 2145 has received from the 2145 UPS suggests the 2145 UPS power cable, the signal cable, or both, are not connected correctly. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1151 |
Data that the 2145 has received from the 2145 UPS-1U suggests the 2145 UPS-1U power cable, the signal cable, or both, are not connected correctly. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1152 |
Incorrect type of uninterruptible power supply detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1155 |
A power domain error has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1160 |
The output load on the 2145 UPS exceeds the specification. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1161 |
The output load on the 2145 UPS-1U exceeds the specifications (reported by 2145 UPS-1U alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1165 |
The 2145 UPS output load is unexpectedly high. The 2145 UPS output is possibly connected to an extra non-2145 load. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1166 |
The 2145 UPS-1U output load is unexpectedly high. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1170 |
2145 UPS electronics fault (reported by the 2145 UPS alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1171 |
2145 UPS-1U electronics fault (reported by the 2145 UPS-1U alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1175 |
A problem has occurred with the uninterruptible power supply frame fault (reported by uninterruptible power supply alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1179 |
Too many drives attached to the system. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1180 |
2145 UPS battery fault (reported by 2145 UPS alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1181 |
2145 UPS-1U battery fault (reported by 2145 UPS-1U alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1182 |
Ambient temperature is too high during system startup. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1183 |
The nodes hardware configuration does not meet the minimum requirements. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1185 |
2145 UPS fault, with no specific FRU identified (reported by uninterruptible power supply alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1186 |
A problem has occurred in the 2145 UPS-1U, with no specific FRU identified (reported by 2145 UPS-1U alarm bits). |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1187 |
Node software is inconsistent or damaged |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1188 |
Too many software crashes have occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1189 |
The node is held in the service state. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1190 |
The 2145 UPS battery has reached its end of life. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1191 |
The 2145 UPS-1U battery has reached its end of life. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1192 |
Unexpected node error |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1193 |
The UPS battery charge is not enough to allow the node to start. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1194 |
Automatic recovery of offline node has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1195 |
Node missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1198 |
Detected hardware is not a valid configuration. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1200 |
The configuration is not valid. Too many devices, MDisks, or targets have been presented to the system. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1201 |
A flash drive requires a recovery. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1202 |
A flash drive is missing from the configuration. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1203 |
A duplicate Fibre Channel frame has been received. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1210 |
A local Fibre Channel port has been excluded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1212 |
Power supply exceeded temperature threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1213 |
Boot drive missing, out of sync, or failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1214 |
Boot drive is in the wrong slot. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1215 |
A flash drive is failing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1216 |
SAS errors have exceeded thresholds. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1217 |
A flash drive has exceeded the temperature warning threshold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1220 |
A remote Fibre Channel port has been excluded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1230 |
A login has been excluded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1260 |
SAS cable fault type 2. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1298 |
A node has encountered an error updating. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1310 |
A managed disk is reporting excessive errors. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1311 |
A flash drive is offline due to excessive errors. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1320 |
A disk I/O medium error has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1322 |
Data protection information mismatch. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1328 |
Encryption key required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1330 |
A suitable managed disk (MDisk) or drive for use as a quorum disk was not found. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1335 |
Quorum disk not available. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1340 |
A managed disk has timed out. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1350 |
IB ports are not operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1360 |
A SAN transport error occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1370 |
A managed disk error recovery procedure (ERP) has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1400 |
The 2145 cannot detect an Ethernet connection. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1403 |
External port not operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1450 |
Fewer Fibre Channel I/O ports operational. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1471 |
Interface card is unsupported. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1472 |
Boot drive is in an unsupported slot. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1473 |
The installed battery is at a hardware revision level that is not supported by the current code level. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1474 |
Battery is nearing end of life. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1475 |
Battery is too hot. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1476 |
Battery is too cold. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1550 |
A cluster path has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1570 |
Quorum disk configured on controller that has quorum disabled |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1600 |
Mirrored disk repair halted because of difference. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1610 |
There are too many copied media errors on a managed disk. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1620 |
A storage pool is offline. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1623 |
One or more MDisks on a controller are degraded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1624 |
Controller configuration has unsupported RDAC mode. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1625 |
Incorrect disk controller configuration. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1627 |
The cluster has insufficient redundancy in its controller connectivity. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1630 |
The number of device logins was reduced. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1660 |
The initialization of the managed disk has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1670 |
The CMOS battery on the system board failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1680 |
Drive fault type 1 |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1684 |
Drive is missing. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1686 |
Drive fault type 3. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1689 |
Array MDisk has lost redundancy. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1690 |
No spare protection exists for one or more array MDisks. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1691 |
A background scrub process has found an inconsistency between data and parity on the array. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1692 |
Array MDisk has taken a spare member that does not match array goals. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1693 |
Drive exchange required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1695 |
Persistent unsupported disk controller configuration. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1700 |
Unrecovered remote copy relationship |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1710 |
There are too many cluster partnerships. The number of cluster partnerships has been reduced. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1720 |
Metro Mirror (Remote copy) - Relationship has stopped and lost synchronization, for reason other than a persistent I/O error (LSYNC) |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1740 |
Recovery encryption key not available. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1741 |
Flash module is predicted to fail. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1750 |
Array response time too high. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1780 |
Encryption key changes are not committed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1800 |
The SAN has been zoned incorrectly. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1801 |
A node has received too many Fibre Channel logins from another node. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1802 |
Fibre Channel network settings |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1804 |
IB network settings |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1840 |
The managed disk has bad blocks. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1850 |
Compressed volume copy has bad blocks |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1860 |
Thin-provisioned volume copy offline because of failed repair. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1862 |
Thin-provisioned volume copy offline because of corrupt metadata. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1865 |
Thin-provisioned volume copy offline because of insufficient space. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1870 |
Mirrored volume offline because a hardware read error has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1895 |
Unrecovered FlashCopy mappings |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1900 |
A FlashCopy, Trigger Prepare command has failed because a cache flush has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1910 |
A FlashCopy mapping task was stopped because of the error that is indicated in the sense data. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1920 |
Global and Metro Mirror persistent error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1925 |
Cached data cannot be destaged. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1930 |
Migration suspended. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1940 |
HyperSwap® volume or consistency group has lost synchronization between sites. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 1950 |
Unable to mirror medium error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2008 |
A software downgrade has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2010 |
A software update has failed. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2020 |
IP Remote Copy link unavailable. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2021 |
Partner cluster IP address unreachable. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2022 |
Cannot authenticate with partner cluster. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2023 |
Unexpected cluster ID for partner cluster. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2030 |
Software error. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2035 |
Drive has disabled protection information support. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2040 |
A software update is required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2055 |
System reboot required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2060 |
Manual discharge of batteries required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2070 |
A drive has been detected in an enclosure that does not support that drive. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2100 |
A software error has occurred. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2115 |
Performance of external MDisk has changed |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2258 |
System SSL certificate has expired. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2500 |
A secure shell (SSH) session limit for the cluster has been reached. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2550 |
Encryption key on USB flash drive removed |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2555 |
Encryption key error on USB flash drive. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2600 |
The cluster was unable to send an email. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2601 |
Error detected while sending an email. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2700 |
Unable to access NTP network time server |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 2702 |
Check configuration settings of the NTP server on the CMM |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3000 |
The 2145 UPS temperature is close to its upper limit. If the temperature continues to rise the 2145 UPS will power off. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3001 |
The 2145 UPS-1U temperature is close to its upper limit. If the temperature continues to rise the 2145 UPS-1U will power off. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3010 |
Internal uninterruptible power supply software error detected. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3024 |
Technician port connection invalid |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3025 |
A virtualization feature license is required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3029 |
Virtualization feature capacity is not valid. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3030 |
Global and Metro Mirror feature capacity not set. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3031 |
FlashCopy feature capacity not set. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3032 |
Feature license limit exceeded. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3035 |
Physical Disk FlashCopy feature license required |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3036 |
Physical Disk Global and Metro Mirror feature license required |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3080 |
Global or Metro Mirror relationship or consistency group with deleted partnership |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3081 |
Unable to send email to any of the configured email servers. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3090 |
Drive firmware download is cancelled by user or system, problem diagnosis required. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
| 3130 |
System SSL certificate expires within the next 30 days. |
V7000 |
技术支持/手机 13301272832 (微信同号) |
